Oct 3, 2015

It's time to make HTTPS default

It's time to make a move. 

When developing websites we are focusing on modern standards, like HTML5, CSS3, we put great attention to detail on design, UX and SEO.


It's time we do one more thing when building for the web.
It's time to enable SSL on the websites we make. No matter what the content is, even if it just a simple portfiolio. Keeping your clients privacy and maintaining security is YOUR responsibility. If you need a reason - even if it's just managing the content, you're probably forcing your clients to send their passwords in plain text when logging in the CMS.

It's time to make HTTPS the default.

Reasons for and "against" are covered in this article, but basically having SSL enabled websites lead to:
  • Better security
  • Better privacy for your users
  • Better referral data
  • Google ranks you better


Usually the thing that is holding us back are expenses. Buying a SSL certificate is not cheap, although it's only slightly more expensive than owning a domain name.
However, there are a lot of options, even free ones.
You can use Cloudflare, which can serve like a SSL proxy between your server and the client.
StartCom provides free SSL certificates, but their free license does not include commercial use. But there are good news.

In November, the Internet Security Research Group (ISRG) is launching Let's Encrypt, a free service for all.

Aug 20, 2015

Android stuck in bootloop

Upgrading and downgrading to/from Lollipop (Android 5) has caused some issues. Searching for a fix usually yields tutorials on how to do a factory reset i.e. wipe the whole device, which I do not want to do.

For me an easier fix worked.

It turns out that this whole ordeal is caused by Google Now launcher not starting. Some suggest trying someone calling you, which wouldn't work if you can't enter your PIN number.

Using ADB however, you can open up settings and do some things that could fix the problem.

adb shell am start -n com.android.settings/.Settings

In the settings you can go to 'applications' there swipe right to the 'disabled' category - where you can find 'Google Search' and you can enable it again.
One can probably install an alternative launcher - and if that works the disabling of the google launcher (aka 'Google Search') should not be a problem.

http://android.stackexchange.com/a/82049

This will fix the non-working home button and notifications not showing up. 
adb shell am start -n com.google.android.setupwizard/.SetupWizardTestActivity
Complete the wizard, stuff works again.
 http://forum.xda-developers.com/google-nexus-5/general/guide-dirty-flash-lpv-to-lrx21o-t2940358/post56756143#post56756143[1]

Jul 29, 2015

Opencart 2.x Main banner (slideshow) speed change

Open file /catalog/view/theme/default/template/module/slideshow.tpl and change the red value (in miliseconds):

$('#slideshow<?php echo $module; ?>').owlCarousel({
        items: 6,
        autoPlay: 5000,
        singleItem: true,
        navigation: true,
        navigationText: ['<i class="fa fa-chevron-left fa-5x"></i>', '<i class="fa fa-chevron-right fa-5x"></i>'],
        pagination: true
});

Jul 17, 2015

When to use MyISAM or InnoDB

When designing a database in MySQL one of the most common questions one can ask themselves is, is it better to use MyISAM or InnoDB engines for tables. There are other types of engines, but these are most common. There are also many articles on this topic, but I found that it boils down to a few simple things:

If you need FULLTEXT search, you need to use MyISAM.

If you need Foregin key support (for cascading and such), or you need to support transactions, you need to use InnoDB.




In general, if you do not need any of the special features, it's better to use MyISAM as it performs better (faster and more disk-friendly) for web applications.


There are other features that are not present in other engines as well.

 MyISAM Storage Engine Features
Storage limits256TBTransactionsNoLocking granularityTable
MVCCNoGeospatial data type supportYesGeospatial indexing supportYes
B-tree indexesYesT-tree indexesNoHash indexesNo
Full-text search indexesYesClustered indexesNoData cachesNo
Index cachesYesCompressed dataYes[a]Encrypted data[b]Yes
Cluster database supportNoReplication support[c]YesForeign key supportNo
Backup / point-in-time recovery[d]YesQuery cache supportYesUpdate statistics for data dictionaryYes
[a] Compressed MyISAM tables are supported only when using the compressed row format. Tables using the compressed row format with MyISAM are read only.
[b] Implemented in the server (via encryption functions), rather than in the storage engine.
[c] Implemented in the server, rather than in the storage engine.
[d] Implemented in the server, rather than in the storage engine.

Key Advantages of InnoDB

InnoDB is a high-reliability and high-performance storage engine for MySQL. Key advantages of InnoDB include:
  • Its design follows the ACID model, with transactions featuring commitrollback, and crash-recovery capabilities to protect user data.
  • Row-level locking (without escalation to coarser granularity locks) and Oracle-style consistent reads increase multi-user concurrency and performance.
  • InnoDB tables arrange your data on disk to optimize common queries based on primary keys. Each InnoDB table has a primary key index called the clustered index that organizes the data to minimize I/O for primary key lookups.
  • To maintain data integrity, InnoDB also supports FOREIGN KEY referential-integrity constraints.
  • You can freely mix InnoDB tables with tables from other MySQL storage engines, even within the same statement. For example, you can use a join operation to combine data from InnoDB and MEMORY tables in a single query.
  • InnoDB has been designed for CPU efficiency and maximum performance when processing large data volumes.

Jun 21, 2015

HTML+CSS Collapse table columns into rows in Media Query on small screens

The simple solution for this is:

@media(max-width:767px) {
table { 
display: block; 
}

th {
width:100%;
         display: block;
}
}

However, this trick (forcing display:block on column) only works for <th>, but not on <td>!

May 30, 2015

Ubuntu + Nginx + PHP5-FPM + MariaDB + Varnish 4.0 + SSL termination cheat sheet

This is my cheat sheet for future reference in case I forget. It's composed from various blogs around the interwebz and modified to suit my needs. I thought someone might find this useful.
I won't go into much details about config definitions, it's cheat sheet after all :)

We'll setup Varnish caching engine with Nginx. Nginx will also serve as reverse proxy for SSL (https) requests.

My working environment:

Ubuntu 14.04.2 LTS | Trusty
Nginx 1.4.6
PHP 5.5.9
Varnish: 4.0.3-2
MariaDB: 5.5.43

Important config sections are highlighted. You need to change this.

Varnish will listen on port 80 and forward requests to backend (Nginx) listening on port 8080.

We are doing this as root:

sudo -s

1. Install Varnish


apt-get install apt-transport-https
curl https://repo.varnish-cache.org/GPG-key.txt | apt-key add -
echo "deb https://repo.varnish-cache.org/ubuntu/ trusty varnish-4.0" >> /etc/apt/sources.list.d/varnish-cache.list
apt-get update
apt-get install varnish


2. Install Nginx + Naxsi



echo "deb http://ppa.launchpad.net/nginx/stable/ubuntu $(lsb_release -sc) main" | sudo tee /etc/apt/sources.list.d/nginx-stable.list
apt-key adv --keyserver keyserver.ubuntu.com --recv-keys C300EE8C
apt-get update
apt-get install nginx
apt-get install nginx-naxsi
apt-get install libpcre3-dev libssl-dev

3. Install PHP5-FPM


apt-get install php5-fpm

4. Install MariaDB server


apt-get install mariadb-server

5. Configure Nginx (I also use CloudFlare in front)


Generate certificates for SSL sessions:

mkdir -p /etc/nginx/ssl
openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout /etc/nginx/ssl/domain.example.key -out /etc/nginx/ssl/domain.example.crt

Edit nginx.conf:

nano /etc/nginx/nginx.conf

user www-data;
worker_processes 4;
pid /run/nginx.pid;

events {
worker_connections 768;
multi_accept on;
use epoll;
}

http {

#Basic Settings

#Cloudflare real IP
set_real_ip_from 199.27.128.0/21;
set_real_ip_from 173.245.48.0/20;
set_real_ip_from 103.21.244.0/22;
set_real_ip_from 103.22.200.0/22;
set_real_ip_from 103.31.4.0/22;
set_real_ip_from 141.101.64.0/18;
set_real_ip_from 108.162.192.0/18;
set_real_ip_from 190.93.240.0/20;
set_real_ip_from 188.114.96.0/20;
set_real_ip_from 197.234.240.0/22;
set_real_ip_from 198.41.128.0/17;
set_real_ip_from 162.158.0.0/15;
set_real_ip_from 104.16.0.0/12;
set_real_ip_from 172.64.0.0/13;
set_real_ip_from 2400:cb00::/32;
set_real_ip_from 2606:4700::/32;
set_real_ip_from 2803:f800::/32;
set_real_ip_from 2405:b500::/32;
set_real_ip_from 2405:8100::/32;
real_ip_header CF-Connecting-IP;

#Varnish get real IP
real_ip_header X-Forwarded-For;
set_real_ip_from 127.0.0.1;

#TCP and buffer settings
sendfile on;
tcp_nopush on;
tcp_nodelay on;
keepalive_timeout 20;
client_max_body_size 15m;
client_body_timeout 60;
client_header_timeout 60;
#client_body_buffer_size 1K;
#client_header_buffer_size 1k;
#large_client_header_buffers 4 8k;
send_timeout 60;
reset_timedout_connection on;
types_hash_max_size 2048;
server_tokens off;

include /etc/nginx/mime.types;
default_type application/octet-stream;

#Logging Settings

access_log /var/log/nginx/access.log;
error_log /var/log/nginx/error.log;

#Gzip Settings
gzip on;
gzip_disable "msie6";
gzip_vary on;
gzip_proxied any;
gzip_comp_level 6;
gzip_min_length 512;
gzip_buffers 16 8k;
gzip_http_version 1.1;
#gzip_types text/css text/javascript text/xml text/plain text/x-component application/javascript application/x-javascript application/json application/xml application/rss+xml font/truetype application/x-font-ttf font/opentype application/vnd.ms-fontobject image/svg+xml;


#Uncomment it if you installed nginx-naxsi
include /etc/nginx/naxsi_core.rules;

#Virtual Host Configs
include /etc/nginx/conf.d/*.conf;
include /etc/nginx/sites-enabled/*;
}

nano /etc/nginx/sites-enabled/example.domain.conf

server {
listen 127.0.0.1:8080;
server_name example.domain.com www.example.domain.com;
root "/home/example.domain/public_html";

index index.php;
client_max_body_size 10m;

access_log /home/example.domain/_logs/access.log;
error_log /home/example.domain/_logs/error.log;

if ($http_user_agent ~* (Baiduspider|webalta|nikto|wkito|pikto|scan|acunetix|morfeus|webcollage|youdao) ) {
return 401;
}

if ($http_user_agent ~* (HTTrack|clshttp|archiver|loader|email|harvest|extract|grab|miner) ) {
return 401;
}

location ~ /(\.|wp-config.php|readme.html|license.txt) {
return 404;
}

# Add trailing slash to */wp-admin requests.
rewrite /wp-admin$ $scheme://$host$uri/ permanent;

location / {
include /etc/nginx/naxsi.rules;
try_files $uri $uri/ /index.php$uri?$args;
}

#Needed by Naxsi
location /RequestDenied {
return 403;
}

location ~ "^(.+\.php)($|/)" {
fastcgi_split_path_info ^(.+\.php)(.*)$;

fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param SCRIPT_NAME $fastcgi_script_name;
fastcgi_param PATH_INFO $fastcgi_path_info;
fastcgi_param SERVER_NAME $host;

if ($uri !~ "^/uploads/") {
fastcgi_pass unix:/var/run/example.domain_fpm.sock; #You can use TCP connection instead or single sock for all sites. You can define this (pools) in /etc/php5/fpm/pool.d/
}
include fastcgi_params;
}

location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ {
expires max;
log_not_found off;
access_log off;
}

location ~* \.(html|htm)$ {
expires 30m;
}

location ~* /\.(ht|git|svn) {
deny all;
}

#Add compression
gzip on;
gzip_comp_level 2;
gzip_min_length 1000;
gzip_proxied expired no-cache no-store private auth;
gzip_types text/plain application/x-javascript text/xml text/css application/xml;

}

server {
listen 443 ssl;
server_name example.domain.com www.example.domain.com;
ssl_certificate /etc/nginx/ssl/example.domain.crt;
ssl_certificate_key /etc/nginx/ssl/example.domain.key;

location / {

## Pass the request on to Varnish.
location / {
proxy_pass http://127.0.0.1:80;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto https;
proxy_set_header X-Forwarded-Port 443;
proxy_set_header Host $host;
proxy_redirect off;
                }
         }
}

6. Configure naxsi for Nginx (Optimized for Wordpress):


nano /etc/nginx/naxsi.rules

# Sample rules file for default vhost.

#LearningMode;
SecRulesEnabled;
#SecRulesDisabled;
DeniedUrl "/RequestDenied";

## check rules
CheckRule "$SQL >= 8" BLOCK;
CheckRule "$RFI >= 8" BLOCK;
CheckRule "$TRAVERSAL >= 4" BLOCK;
CheckRule "$EVADE >= 4" BLOCK;
CheckRule "$XSS >= 8" BLOCK;

# WordPress naxsi rules

### HEADERS
BasicRule wl:1000,1001,1005,1007,1010,1011,1013,1100,1200,1308,1309,1310,1311,1315 "mz:$HEADERS_VAR:cookie";
# xmlrpc
BasicRule wl:1402 "mz:$HEADERS_VAR:content-type";

### simple BODY (POST)
BasicRule wl:1001,1015,1009,1311,1310,1101,1016 "mz:$URL:/|$BODY_VAR:customized";
# comments
BasicRule wl:1000,1010,1011,1013,1015,1200,1310,1311 "mz:$BODY_VAR:post_title";
BasicRule wl:1000 "mz:$BODY_VAR:original_publish";
BasicRule wl:1000 "mz:$BODY_VAR:save";
BasicRule wl:1008,1010,1011,1013,1015 "mz:$BODY_VAR:sk2_my_js_payload";
BasicRule wl:1001,1009,1005,1016,1100,1310 "mz:$BODY_VAR:url";
BasicRule wl:1009,1100 "mz:$BODY_VAR:referredby";
BasicRule wl:1009,1100 "mz:$BODY_VAR:_wp_original_http_referer";
BasicRule wl:1000,1001,1005,1008,1007,1009,1010,1011,1013,1015,1016,1100,1200,1302,1303,1310,1311,1315,1400 "mz:$BODY_VAR:comment";
BasicRule wl:1100 "mz:$BODY_VAR:redirect_to";
BasicRule wl:1000,1009,1315 "mz:$BODY_VAR:_wp_http_referer";
BasicRule wl:1000 "mz:$BODY_VAR:action";
BasicRule wl:1001,1013 "mz:$BODY_VAR:blogname";
BasicRule wl:1015,1013 "mz:$BODY_VAR:blogdescription";
BasicRule wl:1015 "mz:$BODY_VAR:date_format_custom";
BasicRule wl:1015 "mz:$BODY_VAR:date_format";
BasicRule wl:1015 "mz:$BODY_VAR:tax_input%5bpost_tag%5d";
BasicRule wl:1015 "mz:$BODY_VAR:tax_input[post_tag]";
BasicRule wl:1100 "mz:$BODY_VAR:siteurl";
BasicRule wl:1100 "mz:$BODY_VAR:home";
BasicRule wl:1000,1015 "mz:$BODY_VAR:submit";
# news content matches pretty much everything
BasicRule wl:0 "mz:$BODY_VAR:content";
BasicRule wl:1000 "mz:$BODY_VAR:delete_option";
BasicRule wl:1000 "mz:$BODY_VAR:prowl-msg-message";
BasicRule wl:1100 "mz:$BODY_VAR:_url";
BasicRule wl:1001,1009 "mz:$BODY_VAR:c2c_text_replace%5btext_to_replace%5d";
BasicRule wl:1200 "mz:$BODY_VAR:ppn_post_note";
BasicRule wl:1100 "mz:$BODY_VAR:author";
BasicRule wl:1001,1015 "mz:$BODY_VAR:excerpt";
BasicRule wl:1015 "mz:$BODY_VAR:catslist";
BasicRule wl:1005,1008,1009,1010,1011,1015,1315 "mz:$BODY_VAR:cookie";
BasicRule wl:1101 "mz:$BODY_VAR:googleplus";
BasicRule wl:1007 "mz:$BODY_VAR:name";
BasicRule wl:1007 "mz:$BODY_VAR:action";
BasicRule wl:1100 "mz:$BODY_VAR:attachment%5burl%5d";
BasicRule wl:1100 "mz:$BODY_VAR:attachment_url";
BasicRule wl:1001,1009,1100,1302,1303,1310,1311 "mz:$BODY_VAR:html";
BasicRule wl:1015 "mz:$BODY_VAR:title";
BasicRule wl:1001,1009,1015 "mz:$BODY_VAR:recaptcha_challenge_field";
BasicRule wl:1011 "mz:$BODY_VAR:pwd";
BasicRule wl:1000 "mz:$BODY_VAR:excerpt";

### BODY|NAME
BasicRule wl:1000 "mz:$BODY_VAR:delete_option|NAME";
BasicRule wl:1000 "mz:$BODY_VAR:from|NAME";

### Simple ARGS (GET)
# WP login screen
BasicRule wl:1100 "mz:$ARGS_VAR:redirect_to";
BasicRule wl:1000,1009 "mz:$ARGS_VAR:_wp_http_referer";
BasicRule wl:1000 "mz:$ARGS_VAR:wp_http_referer";
BasicRule wl:1000 "mz:$ARGS_VAR:action";
BasicRule wl:1000 "mz:$ARGS_VAR:action2";
# load and load[] GET variable
BasicRule wl:1000,1015 "mz:$ARGS_VAR:load";
BasicRule wl:1000,1015 "mz:$ARGS_VAR:load[]";
BasicRule wl:1015 "mz:$ARGS_VAR:q";
BasicRule wl:1000,1015 "mz:$ARGS_VAR:load%5b%5d";

### URL
BasicRule wl:1000 "mz:URL|$URL:/wp-admin/update-core.php";
BasicRule wl:1000 "mz:URL|$URL:/wp-admin/update.php";
# URL|BODY
BasicRule wl:1009,1100 "mz:$URL:/wp-admin/post.php|$BODY_VAR:_wp_http_referer";
BasicRule wl:1016 "mz:$URL:/wp-admin/post.php|$BODY_VAR:metakeyselect";
BasicRule wl:11 "mz:$URL:/xmlrpc.php|BODY";
BasicRule wl:11 "mz:$URL:/wp-cron.php|BODY";
BasicRule wl:2 "mz:$URL:/wp-admin/async-upload.php|BODY";
# URL|BODY|NAME
BasicRule wl:1100 "mz:$URL:/wp-admin/post.php|$BODY_VAR:_wp_original_http_referer|NAME";
BasicRule wl:1000 "mz:$URL:/wp-admin/post.php|$BODY_VAR:metakeyselect|NAME";
BasicRule wl:1000 "mz:$URL:/wp-admin/user-edit.php|$BODY_VAR:from|NAME";
BasicRule wl:1100 "mz:$URL:/wp-admin/admin-ajax.php|$BODY_VAR:attachment%5burl%5d|NAME";
BasicRule wl:1100 "mz:$URL:/wp-admin/post.php|$BODY_VAR:attachment_url|NAME";
BasicRule wl:1000 "mz:$URL:/wp-admin/plugins.php|$BODY_VAR:verify-delete|NAME";
BasicRule wl:1310,1311 "mz:$URL:/wp-admin/post.php|$BODY_VAR:post_category[]|NAME";
BasicRule wl:1311 "mz:$URL:/wp-admin/post.php|$BODY_VAR:post_category|NAME";
BasicRule wl:1310,1311 "mz:$URL:/wp-admin/post.php|$BODY_VAR:tax_input[post_tag]|NAME";
BasicRule wl:1310,1311 "mz:$URL:/wp-admin/post.php|$BODY_VAR:newtag[post_tag]|NAME";
BasicRule wl:1310,1311 "mz:$URL:/wp-admin/users.php|$BODY_VAR:users[]|NAME";
# URL|ARGS|NAME
BasicRule wl:1310,1311 "mz:$URL:/wp-admin/load-scripts.php|$ARGS_VAR:load[]|NAME";
BasicRule wl:1000 "mz:$URL:/wp-admin/users.php|$ARGS_VAR:delete_count|NAME";
BasicRule wl:1000 "mz:$URL:/wp-admin/users.php|$ARGS_VAR:update|NAME";

# plain WP site
BasicRule wl:1000 "mz:URL|$URL:/wp-admin/update-core.php";
BasicRule wl:1000 "mz:URL|$URL:/wp-admin/update.php";
# URL|BODY
BasicRule wl:1009,1100 "mz:$URL:/wp-admin/post.php|$BODY_VAR:_wp_http_referer";
BasicRule wl:1016 "mz:$URL:/wp-admin/post.php|$BODY_VAR:metakeyselect";
BasicRule wl:11 "mz:$URL:/xmlrpc.php|BODY";
BasicRule wl:11 "mz:$URL:/wp-cron.php|BODY";
# URL|BODY|NAME
BasicRule wl:1100 "mz:$URL:/wp-admin/post.php|$BODY_VAR:_wp_original_http_referer|NAME";
BasicRule wl:1000 "mz:$URL:/wp-admin/post.php|$BODY_VAR:metakeyselect|NAME";
BasicRule wl:1000 "mz:$URL:/wp-admin/user-edit.php|$BODY_VAR:from|NAME";
BasicRule wl:1100 "mz:$URL:/wp-admin/admin-ajax.php|$BODY_VAR:attachment%5burl%5d|NAME";
BasicRule wl:1310,1311 "mz:$URL:/wp-admin/admin-ajax.php|$BODY_VAR:data[wp-auth-check]|NAME";
BasicRule wl:1310,1311 "mz:$URL:/wp-admin/admin-ajax.php|$BODY_VAR:data[wp-check-locked-posts][]|NAME";
BasicRule wl:1310,1311 "mz:$URL:/wp-admin/update-core.php|$BODY_VAR:checked[]|NAME";
# URL|ARGS|NAME
BasicRule wl:1310,1311 "mz:$URL:/wp-admin/load-scripts.php|$ARGS_VAR:load[]|NAME";
BasicRule wl:1000 "mz:$URL:/wp-admin/users.php|$ARGS_VAR:delete_count|NAME";
BasicRule wl:1000 "mz:$URL:/wp-admin/users.php|$ARGS_VAR:update|NAME";

### Plugins
#WP Minify
BasicRule wl:1015 "mz:$URL:/wp-content/plugins/bwp-minify/min/|$ARGS_VAR:f";

7. Configure Varnish:



nano /etc/varnish/default

# Configuration file for varnish
#
# /etc/init.d/varnish expects the variables $DAEMON_OPTS, $NFILES and $MEMLOCK
# to be set from this shell script fragment.
#
# Note: If systemd is installed, this file is obsolete and ignored. You will
# need to copy /lib/systemd/system/varnish.service to /etc/systemd/system/ and
# edit that file.

# Should we start varnishd at boot? Set to "no" to disable.
START=yes

# Maximum number of open files (for ulimit -n)
NFILES=131072

# Maximum locked memory size (for ulimit -l)
# Used for locking the shared memory log in memory. If you increase log size,
# you need to increase this number as well
MEMLOCK=82000

# Default varnish instance name is the local nodename. Can be overridden with
# the -n switch, to have more instances on a single server.
# INSTANCE=$(uname -n)

# This file contains 4 alternatives, please use only one.

## Alternative 1, Minimal configuration, no VCL
#
# Listen on port 6081, administration on localhost:6082, and forward to
# content server on localhost:8080. Use a 1GB fixed-size cache file.
#
# DAEMON_OPTS="-a :6081 \
# -T localhost:6082 \
# -b localhost:8080 \
# -u varnish -g varnish \
# -S /etc/varnish/secret \
# -s file,/var/lib/varnish/$INSTANCE/varnish_storage.bin,1G"


## Alternative 2, Configuration with VCL
#
# Listen on port 6081, administration on localhost:6082, and forward to
# one content server selected by the vcl file, based on the request.
# Use a 256MB memory based cache.
#
DAEMON_OPTS="-a :80 \
-T localhost:6082 \
-f /etc/varnish/default.vcl \
-S /etc/varnish/secret \
-s malloc,256m"


## Alternative 3, Advanced configuration
#
# See varnishd(1) for more information.
#
# # Main configuration file. You probably want to change it :)
# VARNISH_VCL_CONF=/etc/varnish/default.vcl
#
# # Default address and port to bind to
# # Blank address means all IPv4 and IPv6 interfaces, otherwise specify
# # a host name, an IPv4 dotted quad, or an IPv6 address in brackets.
# VARNISH_LISTEN_ADDRESS=
# VARNISH_LISTEN_PORT=6081
#
# # Telnet admin interface listen address and port
# VARNISH_ADMIN_LISTEN_ADDRESS=127.0.0.1
# VARNISH_ADMIN_LISTEN_PORT=6082
#
# # The minimum number of worker threads to start
# VARNISH_MIN_THREADS=1
#
# # The Maximum number of worker threads to start
# VARNISH_MAX_THREADS=1000
#
# # Idle timeout for worker threads
# VARNISH_THREAD_TIMEOUT=120
#
# # Cache file location
# VARNISH_STORAGE_FILE=/var/lib/varnish/$INSTANCE/varnish_storage.bin
#
# # Cache file size: in bytes, optionally using k / M / G / T suffix,
# # or in percentage of available disk space using the % suffix.
# VARNISH_STORAGE_SIZE=1G
#
# # File containing administration secret
# VARNISH_SECRET_FILE=/etc/varnish/secret
#
# # Backend storage specification
# VARNISH_STORAGE="file,${VARNISH_STORAGE_FILE},${VARNISH_STORAGE_SIZE}"
#
# # Default TTL used when the backend does not specify one
# VARNISH_TTL=120
#
# # DAEMON_OPTS is used by the init script. If you add or remove options, make
# # sure you update this section, too.
# DAEMON_OPTS="-a ${VARNISH_LISTEN_ADDRESS}:${VARNISH_LISTEN_PORT} \
# -f ${VARNISH_VCL_CONF} \
# -T ${VARNISH_ADMIN_LISTEN_ADDRESS}:${VARNISH_ADMIN_LISTEN_PORT} \
# -t ${VARNISH_TTL} \
# -p thread_pool_min=${VARNISH_MIN_THREADS} \
# -p thread_pool_max=${VARNISH_MAX_THREADS} \
# -p thread_pool_timeout=${VARNISH_THREAD_TIMEOUT} \
# -S ${VARNISH_SECRET_FILE} \
# -s ${VARNISH_STORAGE}"
#


## Alternative 4, Do It Yourself
#
# DAEMON_OPTS=""

nano /etc/varnish/default.vcl

# Configuration file for varnish (optimized for Wordpress)

vcl 4.0;

##########BACKEND##########
backend server1 {
.host = "127.0.0.1";
.port = "8080";
.connect_timeout = 600s;
.first_byte_timeout = 600s;
.between_bytes_timeout = 600s;
.max_connections = 800;
}

#Only allow purging from specific IPs
acl purge {
"localhost";
"127.0.0.1";
}

# This function is used when a request is send by a HTTP client (Browser)
##########START SUB VCL_RECV##########
sub vcl_recv {
#Normalize the header, remove the port (in case you're testing this on various TCP ports)
set req.http.Host = regsub(req.http.Host, ":[0-9]+", "");

#Which pages to cache
if(!(req.http.host ~ "domain1.com") &&
!(req.http.host ~ "domain2.com") &&
!(req.http.host ~ "domain3.com")) {
return (pass);
}

#FORCE SSL
if ( (req.http.host ~ "^(?i)domain1.com" || req.http.host ~ "^(?i)www.domain1.com") && req.http.X-Forwarded-Proto !~ "(?i)https") {
return (synth(751, ""));
}

if ( (req.http.host ~ "^(?i)domain2.com" || req.http.host ~ "^(?i)www.domain2.com") && req.http.X-Forwarded-Proto !~ "(?i)https") {
return (synth(750, ""));
}

if ( (req.http.host ~ "^(?i)domain3.com" || req.http.host ~ "^(?i)www.domain3.com") && req.http.X-Forwarded-Proto !~ "(?i)https") {
return (synth(752, ""));
}


#Set client IP to headers
if (req.restarts == 0) {
if (req.http.x-forwarded-for) {
set req.http.X-Forwarded-For =
req.http.X-Forwarded-For + ", " + client.ip;
} else {
set req.http.X-Forwarded-For = client.ip;
}
}


#Allow purging from ACL
if (req.method == "PURGE") {
#If not allowed then a error 405 is returned
if (!client.ip ~ purge) {
return(synth(405, "This IP is not allowed to send PURGE requests."));
}
#If allowed, do a cache_lookup -> vlc_hit() or vlc_miss()
return (purge);
}

#Post requests will not be cached
if (req.http.Authorization || req.method == "POST") {
return (pass);
}

#----------Wordpress specific configuration----------"

#Do not cache the RSS feed
if (req.url ~ "/feed") {
return (pass);
}

#Blitz hack
if (req.url ~ "/mu-.*") {
return (pass);
}


#Do not cache the admin and login pages
if (req.url ~ "/wp-(login|admin)") {
return (pass);
}

#Do not cache the WooCommerce pages
### REMOVE IT IF YOU DO NOT USE WOOCOMMERCE ###
if (req.url ~ "/(cart|my-account|checkout|addons|/?add-to-cart=)") {
return (pass);
}

#Remove the "has_js" cookie
set req.http.Cookie = regsuball(req.http.Cookie, "has_js=[^;]+(; )?", "");

#Remove any Google Analytics based cookies
set req.http.Cookie = regsuball(req.http.Cookie, "__utm.=[^;]+(; )?", "");

#Remove the Quant Capital cookies (added by some plugin, all __qca)
set req.http.Cookie = regsuball(req.http.Cookie, "__qc.=[^;]+(; )?", "");

#Remove the wp-settings-1 cookie
set req.http.Cookie = regsuball(req.http.Cookie, "wp-settings-1=[^;]+(; )?", "");

#Remove the wp-settings-time-1 cookie
set req.http.Cookie = regsuball(req.http.Cookie, "wp-settings-time-1=[^;]+(; )?", "");

#Remove the wp test cookie
set req.http.Cookie = regsuball(req.http.Cookie, "wordpress_test_cookie=[^;]+(; )?", "");

#Are there cookies left with only spaces or that are empty?
if (req.http.cookie ~ "^ *$") {
unset req.http.cookie;
}

#Cache the following files extensions
if (req.url ~ "\.(css|js|png|gif|jp(e)?g|swf|ico)") {
unset req.http.cookie;
}

#Normalize Accept-Encoding header and compression
if (req.http.Accept-Encoding) {
#Do not compress compressed files ...
if (req.url ~ "\.(jpg|png|gif|gz|tgz|bz2|tbz|mp3|ogg)$") {
unset req.http.Accept-Encoding;
} elsif (req.http.Accept-Encoding ~ "gzip") {
set req.http.Accept-Encoding = "gzip";
} elsif (req.http.Accept-Encoding ~ "deflate") {
set req.http.Accept-Encoding = "deflate";
} else {
unset req.http.Accept-Encoding;
}
}

#Check the cookies for Wordpress-specific items
if (req.http.Cookie ~ "wordpress_" || req.http.Cookie ~ "comment_") {
return (pass);
}
if (!req.http.cookie) {
unset req.http.cookie;
}

#----------End of Wordpress specific configuration----------#

#Do not cache HTTP authentication and HTTP Cookie
if (req.http.Authorization || req.http.Cookie) {
# Not cacheable by default
return (pass);
}

#Cache all others requests
return (hash);
}
#########END SUB_VCL_RECV##########

#PART OF FORCE SSL
sub vcl_synth {
if (resp.status == 751) {
set resp.status = 301;
set resp.http.Location = "https://domain1.com" + req.url;
return(deliver);
}

if (resp.status == 750) {
set resp.status = 301;
set resp.http.Location = "https://domain2.com" + req.url;
return(deliver);
}

if (resp.status == 752) {
set resp.status = 301;
set resp.http.Location = "https://domain3.com" + req.url;
return(deliver);
}


}


sub vcl_pipe {
return (pipe);
}

sub vcl_pass {
return (fetch);
}

#The data on which the hashing will take place
sub vcl_hash {
hash_data(req.url);
if (req.http.host) {
hash_data(req.http.host);
} else {
hash_data(server.ip);
}

#Include the X-Forward-Proto header, since we want to treat HTTPS
# requests differently, and make sure this header is always passed
# properly to the backend server.
if (req.http.X-Forwarded-Proto) {
hash_data(req.http.X-Forwarded-Proto);
}

#If the client supports compression, keep that in a different cache
if (req.http.Accept-Encoding) {
hash_data(req.http.Accept-Encoding);
}
return (lookup);
}

#This function is used when a request is sent by our backend (Nginx server)
##########START VCL_BACKEND_RESPONSE##########
sub vcl_backend_response {
#Remove some headers we never want to see
unset beresp.http.Server;
unset beresp.http.X-Powered-By;

#For static content strip all backend cookies
if (bereq.url ~ "\.(css|js|png|gif|jp(e?)g)|swf|ico") {
unset beresp.http.cookie;
}

#Only allow cookies to be set if we're in admin area
if (beresp.http.Set-Cookie && bereq.url !~ "^/wp-(login|admin)") {
unset beresp.http.Set-Cookie;
}

#Do not cache response to posted requests or those with basic auth
if ( bereq.method == "POST" || bereq.http.Authorization ) {
set beresp.uncacheable = true;
set beresp.ttl = 120s;
return (deliver);
}

#Do not cache search results
if ( bereq.url ~ "\?s=" ){
set beresp.uncacheable = true;
set beresp.ttl = 120s;
return (deliver);
}

#Only cache status ok
if ( beresp.status != 200 ) {
set beresp.uncacheable = true;
set beresp.ttl = 120s;
return (deliver);
}

#A TTL of 24h
set beresp.ttl = 24h;
#Define the default grace period to serve cached content
set beresp.grace = 30s;

return (deliver);
}
##########END VCL_BACKEND_RESPONSE##########

##########START VCL_DELIVER##########
sub vcl_deliver {
if (obj.hits > 0) {
set resp.http.X-Cache = "cached";
} else {
set resp.http.x-Cache = "uncached";
}

#Remove some headers: PHP version
unset resp.http.X-Powered-By;

#Remove some headers: Apache\Nginx version & OS
unset resp.http.Server;

#Remove some headers: Varnish
unset resp.http.Via;
unset resp.http.X-Varnish;

return (deliver);
}
##########END VCL_DELIVER##########

sub vcl_init {
return (ok);
}

sub vcl_fini {
return (ok);
}

8. Set other config files:


nano /etc/php5/fpm/php.ini

[PHP]
display_errors = off
log_errors: on
max_input_time: 60
output_buffering: 4096
register_argc_argv: off
request_order: GP
session.bug_compat_42: off
session.bug_compat_warn: off
session.gc_divisor: 1000
session.hash_bits_per_character: 5
short_open_tag: off
variables_order: GPCS
engine = On
short_open_tag = Off
asp_tags = Off
precision = 14
output_buffering = 4096
zlib.output_compression = Off
implicit_flush = Off
unserialize_callback_func =
serialize_precision = 17
disable_functions = pcntl_alarm,pcntl_fork,pcntl_waitpid,pcntl_wait,pcntl_wifexited,pcntl_wifstopped,pcntl_wifsignaled,pcntl_wexitstatus,pcntl_wtermsig,pcntl_wstopsig,pcntl_signal,pcntl_signal_dispatch,pcntl_get_last_error,pcntl_strerror,pcntl_sigprocmask,pcntl_sigwaitinfo,pcntl_sigtimedwait,pcntl_exec,pcntl_getpriority,pcntl_setpriority,system,exec,shell_exec,passthru,proc_close,proc_get_status,proc_nice,proc_open,proc_terminate,popen,pclose,phpinfo,eval
disable_classes =
ignore_user_abort = Off
zend.enable_gc = On
expose_php = Off
max_execution_time = 120
max_input_time = 60
memory_limit = 64M
error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
display_errors = Off
display_startup_errors = Off
log_errors = On
log_errors_max_len = 1024
ignore_repeated_errors = Off
ignore_repeated_source = Off
report_memleaks = On
track_errors = Off
html_errors = On
variables_order = "GPCS"
request_order = "GP"
register_argc_argv = Off
auto_globals_jit = On
post_max_size = 15M
auto_prepend_file =
auto_append_file =
default_mimetype = "text/html"
default_charset = "UTF-8"
doc_root =
user_dir =
enable_dl = Off
cgi.fix_pathinfo=1
file_uploads = On
upload_max_filesize = 15M
max_file_uploads = 20
allow_url_fopen = Off
allow_url_include = Off
default_socket_timeout = 30
[CLI Server]
cli_server.color = On
pdo_mysql.cache_size = 2000
pdo_mysql.default_socket=
[mail function]
SMTP = localhost
smtp_port = 25
mail.add_x_header = On
[SQL]
sql.safe_mode = Off
[ODBC]
odbc.allow_persistent = On
odbc.check_persistent = On
odbc.max_persistent = -1
odbc.max_links = -1
odbc.defaultlrl = 4096
odbc.defaultbinmode = 1
[Interbase]
ibase.allow_persistent = 1
ibase.max_persistent = -1
ibase.max_links = -1
ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
ibase.dateformat = "%Y-%m-%d"
ibase.timeformat = "%H:%M:%S"
[MySQL]
mysql.allow_local_infile = On
mysql.allow_persistent = Off
mysql.cache_size = 2000
mysql.max_persistent = -1
mysql.max_links = -1
mysql.default_port =
mysql.default_socket =
mysql.default_host =
mysql.default_user =
mysql.default_password =
mysql.connect_timeout = 60
mysql.trace_mode = Off
[MySQLi]
mysqli.max_persistent = -1
mysqli.allow_persistent = On
mysqli.max_links = -1
mysqli.cache_size = 2000
mysqli.default_port = 3306
mysqli.default_socket =
mysqli.default_host =
mysqli.default_user =
mysqli.default_pw =
mysqli.reconnect = Off
[mysqlnd]
mysqlnd.collect_statistics = On
mysqlnd.collect_memory_statistics = Off
[PostgreSQL]
pgsql.allow_persistent = On
pgsql.auto_reset_persistent = Off
pgsql.max_persistent = -1
pgsql.max_links = -1
pgsql.ignore_notice = 0
pgsql.log_notice = 0
[Sybase-CT]
sybct.allow_persistent = On
sybct.max_persistent = -1
sybct.max_links = -1
sybct.min_server_severity = 10
sybct.min_client_severity = 10
[bcmath]
bcmath.scale = 0
[Session]
session.save_handler = files
session.use_strict_mode = 0
session.use_cookies = 1
session.use_only_cookies = 1
session.name = PHPSESSID
session.auto_start = 0
session.cookie_lifetime = 0
session.cookie_path = /
session.cookie_domain =
session.cookie_httponly =
session.serialize_handler = php
session.gc_probability = 0
session.gc_divisor = 1000
session.gc_maxlifetime = 1440
session.bug_compat_42 = Off
session.bug_compat_warn = Off
session.referer_check =
session.cache_limiter = nocache
session.cache_expire = 180
session.use_trans_sid = 0
session.hash_function = 0
session.hash_bits_per_character = 5
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
[MSSQL]
mssql.allow_persistent = On
mssql.max_persistent = -1
mssql.max_links = -1
mssql.min_error_severity = 10
mssql.min_message_severity = 10
mssql.compatibility_mode = Off
mssql.secure_connection = Off
[Tidy]
tidy.clean_output = Off
[soap]
soap.wsdl_cache_enabled=1
soap.wsdl_cache_dir="/tmp"
soap.wsdl_cache_ttl=86400
soap.wsdl_cache_limit = 5
[ldap]
ldap.max_links = -1

nano /etc/php5/fpm/pool.d/domain.example.pool.conf

; Use this config only if you want to run separate php5-fpm process per user
; Pool name, the variable $pool can be used in any directive and will be replaced by the
; pool name ('www' here)
[user]

; Per pool prefix
; It only applies on the following directives:
; - 'slowlog'
; - 'listen' (unixsocket)
; - 'chroot'
; - 'chdir'
; - 'php_values'
; - 'php_admin_values'
; When not set, the global prefix (or /usr) applies instead.
; Note: This directive can also be relative to the global prefix.
; Default Value: none
;prefix = /path/to/pools/$pool

; The address on which to accept FastCGI requests.
; Valid syntaxes are:
; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
; a specific port;
; 'port' - to listen on a TCP socket to all addresses on a
; specific port;
; '/path/to/unix/socket' - to listen on a unix socket.
; Note: This value is mandatory.
listen = /var/run/example.domain_fpm.sock

; Set listen(2) backlog. A value of '-1' means unlimited.
; Default Value: 128 (-1 on FreeBSD and OpenBSD)
;listen.backlog = -1

; List of ipv4 addresses of FastCGI clients which are allowed to connect.
; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
; must be separated by a comma. If this value is left blank, connections will be
; accepted from any ip address.
; Default Value: any
;listen.allowed_clients = 127.0.0.1

; Set permissions for unix socket, if one is used. In Linux, read/write
; permissions must be set in order to allow connections from a web server. Many
; BSD-derived systems allow connections regardless of permissions.
; Default Values: user and group are set as the running user
; mode is set to 0666
listen.owner = user
listen.group = user
listen.mode = 0660

; Unix user/group of processes
; Note: The user is mandatory. If the group is not set, the default user's group
; will be used.
user = user
group = user

; Choose how the process manager will control the number of child processes.
; Possible Values:
; static - a fixed number (pm.max_children) of child processes;
; dynamic - the number of child processes are set dynamically based on the
; following directives:
; pm.max_children - the maximum number of children that can
; be alive at the same time.
; pm.start_servers - the number of children created on startup.
; pm.min_spare_servers - the minimum number of children in 'idle'
; state (waiting to process). If the number
; of 'idle' processes is less than this
; number then some children will be created.
; pm.max_spare_servers - the maximum number of children in 'idle'
; state (waiting to process). If the number
; of 'idle' processes is greater than this
; number then some children will be killed.
; Note: This value is mandatory.
pm = dynamic

; The number of child processes to be created when pm is set to 'static' and the
; maximum number of child processes to be created when pm is set to 'dynamic'.
; This value sets the limit on the number of simultaneous requests that will be
; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
; CGI.
; Note: Used when pm is set to either 'static' or 'dynamic'
; Note: This value is mandatory.
pm.max_children = 1

; The number of child processes created on startup.
; Note: Used only when pm is set to 'dynamic'
; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
pm.start_servers = 1

; The desired minimum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.min_spare_servers = 1

; The desired maximum number of idle server processes.
; Note: Used only when pm is set to 'dynamic'
; Note: Mandatory when pm is set to 'dynamic'
pm.max_spare_servers = 1

; The number of requests each child process should execute before respawning.
; This can be useful to work around memory leaks in 3rd party libraries. For
; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
; Default Value: 0
pm.max_requests = 500

; The URI to view the FPM status page. If this value is not set, no URI will be
; recognized as a status page. By default, the status page shows the following
; information:
; accepted conn - the number of request accepted by the pool;
; pool - the name of the pool;
; process manager - static or dynamic;
; idle processes - the number of idle processes;
; active processes - the number of active processes;
; total processes - the number of idle + active processes.
; max children reached - number of times, the process limit has been reached,
; when pm tries to start more children (works only for
; pm 'dynamic')
; The values of 'idle processes', 'active processes' and 'total processes' are
; updated each second. The value of 'accepted conn' is updated in real time.
; Example output:
; accepted conn: 12073
; pool: www
; process manager: static
; idle processes: 35
; active processes: 65
; total processes: 100
; max children reached: 1
; By default the status page output is formatted as text/plain. Passing either
; 'html', 'xml' or 'json' as a query string will return the corresponding output
; syntax. Example:
; http://www.foo.bar/status
; http://www.foo.bar/status?json
; http://www.foo.bar/status?html
; http://www.foo.bar/status?xml
; Note: The value must start with a leading slash (/). The value can be
; anything, but it may not be a good idea to use the .php extension or it
; may conflict with a real PHP file.
; Default Value: not set
;pm.status_path = /status

; The ping URI to call the monitoring page of FPM. If this value is not set, no
; URI will be recognized as a ping page. This could be used to test from outside
; that FPM is alive and responding, or to
; - create a graph of FPM availability (rrd or such);
; - remove a server from a group if it is not responding (load balancing);
; - trigger alerts for the operating team (24/7).
; Note: The value must start with a leading slash (/). The value can be
; anything, but it may not be a good idea to use the .php extension or it
; may conflict with a real PHP file.
; Default Value: not set
;ping.path = /ping

; This directive may be used to customize the response of a ping request. The
; response is formatted as text/plain with a 200 response code.
; Default Value: pong
;ping.response = pong

; The access log file
; Default: not set
;access.log = log/$pool.access.log

; The access log format.
; The following syntax is allowed
; %%: the '%' character
; %C: %CPU used by the request
; it can accept the following format:
; - %{user}C for user CPU only
; - %{system}C for system CPU only
; - %{total}C for user + system CPU (default)
; %d: time taken to serve the request
; it can accept the following format:
; - %{seconds}d (default)
; - %{miliseconds}d
; - %{mili}d
; - %{microseconds}d
; - %{micro}d
; %e: an environment variable (same as $_ENV or $_SERVER)
; it must be associated with embraces to specify the name of the env
; variable. Some exemples:
; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
; %f: script filename
; %l: content-length of the request (for POST request only)
; %m: request method
; %M: peak of memory allocated by PHP
; it can accept the following format:
; - %{bytes}M (default)
; - %{kilobytes}M
; - %{kilo}M
; - %{megabytes}M
; - %{mega}M
; %n: pool name
; %o: ouput header
; it must be associated with embraces to specify the name of the header:
; - %{Content-Type}o
; - %{X-Powered-By}o
; - %{Transfert-Encoding}o
; - ....
; %p: PID of the child that serviced the request
; %P: PID of the parent of the child that serviced the request
; %q: the query string
; %Q: the '?' character if query string exists
; %r: the request URI (without the query string, see %q and %Q)
; %R: remote IP address
; %s: status (response code)
; %t: server time the request was received
; it can accept a strftime(3) format:
; %d/%b/%Y:%H:%M:%S %z (default)
; %T: time the log has been written (the request has finished)
; it can accept a strftime(3) format:
; %d/%b/%Y:%H:%M:%S %z (default)
; %u: remote user
;
; Default: "%R - %u %t \"%m %r\" %s"
;access.format = %R - %u %t "%m %r%Q%q" %s %f %{mili}d %{kilo}M %C%%

; The timeout for serving a single request after which the worker process will
; be killed. This option should be used when the 'max_execution_time' ini option
; does not stop script execution for some reason. A value of '0' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
request_terminate_timeout = 30s

; The timeout for serving a single request after which a PHP backtrace will be
; dumped to the 'slowlog' file. A value of '0s' means 'off'.
; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
; Default Value: 0
;request_slowlog_timeout = 0

; The log file for slow requests
; Default Value: not set
; Note: slowlog is mandatory if request_slowlog_timeout is set
;slowlog = log/$pool.log.slow

; Set open file descriptor rlimit.
; Default Value: system defined value
;rlimit_files = 1024

; Set max core size rlimit.
; Possible Values: 'unlimited' or an integer greater or equal to 0
; Default Value: system defined value
;rlimit_core = 0

; Chroot to this directory at the start. This value must be defined as an
; absolute path. When this value is not set, chroot is not used.
; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
; of its subdirectories. If the pool prefix is not set, the global prefix
; will be used instead.
; Note: chrooting is a great security feature and should be used whenever
; possible. However, all PHP paths will be relative to the chroot
; (error_log, sessions.save_path, ...).
; Default Value: not set
;chroot =

; Chdir to this directory at the start.
; Note: relative path can be used.
; Default Value: current directory or / when chroot
chdir = /

; Redirect worker stdout and stderr into main error log. If not set, stdout and
; stderr will be redirected to /dev/null according to FastCGI specs.
; Note: on highloaded environement, this can cause some delay in the page
; process time (several ms).
; Default Value: no
;catch_workers_output = yes

; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
; the current environment.
; Default Value: clean env
;env[HOSTNAME] = $HOSTNAME
;env[PATH] = /usr/local/bin:/usr/bin:/bin
;env[TMP] = /tmp
;env[TMPDIR] = /tmp
;env[TEMP] = /tmp

; Additional php.ini defines, specific to this pool of workers. These settings
; overwrite the values previously defined in the php.ini. The directives are the
; same as the PHP SAPI:
; php_value/php_flag - you can set classic ini defines which can
; be overwritten from PHP call 'ini_set'.
; php_admin_value/php_admin_flag - these directives won't be overwritten by
; PHP call 'ini_set'
; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.

; Defining 'extension' will load the corresponding shared extension from
; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
; overwrite previously defined php.ini values, but will append the new value
; instead.

; Note: path INI options can be relative and will be expanded with the prefix
; (pool, global or /usr)

; Default Value: nothing is defined by default except the values in php.ini and
; specified at startup with the -d argument
;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected]
;php_flag[display_errors] = off
;php_admin_value[error_log] = /var/log/fpm-php.www.log
;php_admin_flag[log_errors] = on
;php_admin_value[memory_limit] = 32M
php_admin_value[session.save_path] = "/home/user/_sessions"
php_admin_value[open_basedir] = "/home/user:/usr/share/pear:/usr/share/php:/tmp:/usr/local/lib/php"

php_flag[display_errors] = off
php_admin_value[error_reporting] = 0
php_admin_value[error_log] = /var/log/php5-fpm.log
php_admin_flag[log_errors] = on
php_admin_value[memory_limit] = 128M

9. Add SSL to Wordpress:


Go to your Wordpress web folder, open file wp-config.php and add:

define('FORCE_SSL_ADMIN', true);
define('FORCE_SSL_LOGIN', true);

if ($_SERVER['HTTP_X_FORWARDED_PROTO'] == 'https')
$_SERVER['HTTPS']='on';

Important! Add this before the line "require_once(ABSPATH . 'wp-settings.php');", otherwise you'll get "You do not have sufficient permissions to access this page" message when trying to login into admin (wp-admin).

10. Restart services


service nginx restart
service php5-fpm restart
service varnish restart